One of the most important purposes of Pool Supplies in Kansas City is testing out the water in swimming pools. While some pool owners take samples of their pool water to stores to get tests done, others buy the right supplies and do the testing themselves. Test kits make testing water pretty easy for people who have the time to do their own testing. There are even electronic kits on the market. But even if a pool owner has the right equipment, there are certain things that need to be done to make sure testing goes as planned.
After buying the right Pool Supplies in Kansas City from Banks Blue Valley Pool & Spa Designs or any other pool store, it’s important to take the water sample from the right place in the pool. Ideally, the water sample should be extracted from 12 to 18 inches under the surface of the water. This should be done after the pools system has been on for at least an hour. It’s important that the water has had a chance to circulate before a sample is taken. Also, chlorine levels that are too high can throw off tests. When chlorine levels are high, a neutralizer will have to be used before testing can start. Kits will usually have instructions on how to use neutralizers.
There are other tips that people should follow after buying testing Pool Supplies in Kansas City. For people who have chlorine problems in their pools, getting samples of water in the morning is best. Chlorine is something that will be burned off as the day progresses. Testing it in the morning will allow the test to be conducted without the sun influencing chlorine levels. Testing strips take only about 20 seconds to show results and should be compared immediately. If a person waits to long to compare test strips, the strips may give bad results since the strips can keep changing colors.
Although there isn’t anything wrong with doing home testing, it’s good to take samples to a pool store once every so often to ensure that the tests are being done correctly. If the pool store gets the same results as the pool owner, everything in the testing process is going well. Click here for more information.
