The plumbing in a home or business can be very complex. One branch of pipes brings fresh or potable water into the building while the other removes any waste. Unfortunately, the pipes and fittings used for plumbing may develop a leak, which is why experts like Drain Go Plumbing recommend having the whole system thoroughly inspected. Leaking pipes, faucets and fixtures can ruin many of the materials used in homes and businesses. For example, the wood in most cabinetry is an engineered material created with strands of wood and a water-based resin.
Engineered wood works well for a variety of tasks including cabinets and roof decking. However, once the wood fibers become saturated, they begin to swell. Swelling damages any bonds between the resin and the wood, which can cause the lumber to disintegrate. Small amounts of moisture may not pose an issue, but large leaks and drain problems usually will and this problem typically requires a Plumber Olivebranch MS.
The steps for leak repair vary by the type and location of the problem. Consider the case of a leak hidden inside the walls. In some cases, the property owner may not even know that a leak exists except for the higher-than-normal utility bill. Locating the leak might be tough if the water is being absorbed by the timber in the wall or seeping out of the building. Thankfully, a plumber can locate problems like this with the help of acoustic tools.
Another reason to call a Plumber Olivebranch MS is clogged pipes. Clogs occur for various reasons such as hair in the pipe traps or gunk in the main line. Eliminating the issue can require different steps based on where the clog is located. Indoor blockages usually require the removal of the pipe traps for cleaning. However, replacing the trap requires special care so that the threads are not damaged.
A clog in the main lines is generally eliminated with a pipe snake. Pipe snakes use long, flexible cables to push an auger through the blockage. If the clog cannot be removed with this tool, then the plumber may recommend cleaning the sewer lines with water jetting. Jetting uses a high-pressure stream of water to scour the pipe walls. Please visit the website for more information about plumbing solutions.
