Keep Your Water and Drains Flowing Properly Using Naperville Plumbing Repairs

by | Oct 16, 2014 | Plumbing

Top Of The List

Categories

Archives

If you are like most people the plumbing in your home is one of the last things you think about. Unfortunately, ignoring the plumbing could lead to problems you’ve never even considered such as damage to the floors, walls or structure of the home. One of the more serious concerns with plumbing are those leaks that are difficult to see because they are hidden inside the walls. You may not even realize there is a problem until you get your next water bill and see an excessive amount of water usage. Thankfully, this is one of the many Naperville Plumbing Repairs available. A plumber can use special equipment to listen to the walls for sounds that indicate leaks in the pipes.

The fresh water supply to your home works because the water is under constant pressure. This pressure also causes a number of issues such as leaking faucets and constantly running toilets. Many faucets can be repaired by replacing an internal washer, but this repair requires a bit of finesse to avoid damaging the finish on the fixture. When the toilet leaks it usually requires the components inside the tank be replaced. While this is a relatively easy job there are times when it requires a professional. For instance, when the toilet tank has accumulated rust or lime deposits you will need a way to get these deposits removed.

More serious Naperville Plumbing Repairs can include drainage problems. The most common drain clogs come from a blocked pipe trap. These are the S or U shaped pieces of pipe that you can find under the sink or below the drain. Fixing the problem for a sink is fairly simple. You need to remove the traps and clean them out. The hard part is removing these pieces of pipe without damaging any others.

The other common clog results from excess waste or paper in the toilet. These types of clogs block the main sewer lines and require a plumber to eliminate them. The most commonly used tool for removing sewer clogs is a pipe snake. This is a flexible cable and auger that can maneuver through the pipes and pierce the clog. It enters the pipes through an access point in the pipes or by removal of the toilet. Once the clog is removed you may wish to have the pipes cleaned to reduce the possibility of another clog.